PRODUCT SPECIFICATIONS

ADSL/ATM Support

• Controller-based External ADSL Annex B Modem
• ITU-T G.992.1 (G.dmt) Annex B compliant
• Using Discrete Multi-Tone (DMT) line encoding scheme
• Full Rate transmission at up to 8 Mbps downstream and 640 Kbps upstream
• Rate Adaptive modem at 32 Kbps steps
• ATM Layer with Traffic shaping (UBR/CBR/VBR-nrt)
• AAL ATM Attributes - AAL5
• VPI Range (0-4095) and VCI range (1-65535)
• Multiple PVC up to 8 support
• UNI 3.0, 3.1 an UNI 4.0 ATM Signaling (support for SVCS)
• Spectral compatibility with ISDN European Standard (Annex B)
• F4/F5 OAM Send and Receive/Loopback supported
• Trellis Coding and Echo Cancellation support
• Built in ISDN microfilter

Encapsulation Support

• RFC1483 Bridged for both LLC/VC Mux
• RFC2516 PPPoE Relay support
• Transparent and Spanning Bridge Support

Network Support

• TCP/UDP Application Support
• PPTP Access Concentrator Support
• L2TP VPN Support (Firmware Upgrade)

Management Support

• TFTP Software update support
• Remote management through Telnet console access
• SNMP support for management functionality
• Flash ROM upgradable for future feature enhancement
• Web based Management (Firmware Upgrade)

Security Support

• PAP/CHAP for Password Authentication Support

Chipset

• Virata VC8410 (Helium) - ATM Communications Controller
• Analog Device AD6449 DMT based ADSL modem and ATM framer
• Analog Device AD6440 ADSL Analog Front End
• Analog Device AD8016 ADSL Transmit Line Driver
• Analog Device AD8022 ADSL Receive Line Driver

Memory :

• 4MB SDRAM
• 1MB Flash ROM
• 512KB Flash ROM (for Analog Device DSP)

MTBF

• MTBF = 71,734 hours (BelStress V3.10 Reliability Prediction to BellCore Method [TR-NWT-000332])

PTT Approvals

• Europe (CE)

Platform Support

• OS Independent (supports any platform with an ethernet card installed)

External Connectors

• 1 x RJ11 for WAN interface
• 1 x RJ11 for ISDN handset interface
• 1 x RJ45 for 10Base-T LAN interface
• 1 x 5V DC Power Jack
• 1 x On/Off Power Switch
• 1 x 9 pin Serial Port for local management

Led Indicators

• 1 x Power LED
• 1 x Ethernet Link Status LED
• 1 x Ethernet Activity LED
• 1 x ADSL Receive LED
• 1 x ADSL Transmit LED
• 1 x ADSL Link Status LED

ENVIRONMENTAL

TEMPERATURE

Operating :

• 10 to 45 Celsius
• 50 to 113 Fahrenheit

Non-Operating :

• -25 to 70 Celsius
• -13 to 158 Fahrenheit

HUMIDITY

Operating :

• 30% to 80% Relative Humidity (Non-Condensing)

Non-Operating :

• 10% to 95% Relative Humidity (Non-Condensing)

SYSTEM REQUIREMENTS

• Pentium MMX 233MHz (or above) with Ethernet card