PRODUCT SPECIFICATIONS

VDSL Support

Spectrally compatible to ISDN, POTS (Analog and Digital) Services as well as xDSL services

POTS Splitter built in Population Option

Employs Frequency Division Duplexing (FDD) to separate the downstream channel, the upstream channel, and POTS, ISDN, or PBX signaling services in the frequency domain

Utilises Quadrature Amplitude Modulation (QAM) technique utilizing QAM-256, QAM-128, QAM-64, QAM-32, QAM-16, QAM-8, and QAM-4

Provides symmetric bandwidth up to 5 Mbps (up to 1.5 Km), 10 Mbps (up to 1.2Km) over Category 1, 2, or 3 single-pair copper wiring.

Support ETSI 2 band Plan 997 (Symmetrical) with population option for ETSI 2 Band Plan 998 (Asymmetrical)

Adaptive Equalizer to overcome Bridge Taps and other distortions

Management Support

Console Port Interface

EEPROM for Firmware Upgrade

Chipset

Infineon PEF 22822 QAM Pump

Infineon PEF22811 Analog Front End

Infineon PEF 22810 Line Driver

64 Kbit EEPROM

Platform Support

OS Independent

Power Requirements

Input Voltage : 240V AC (rated) or 110V AC (rated) (AC-DC Power Adaptor which is country specific)

Output Voltage : 5V DC +/- 1%

Output Current : 1.0 A (max) ; 0 A (min)

Frequency : 50 - 60 Hz (rated) 47 - 63 Hz (maximum)

LED Indicators

1 x Power LED

1 x Ethernet Link Status LED

1 x DSL Link Status LED

External Connectors

1 x RJ11 Telephone socket for VDSL line

1 x RJ11 Telephone socket for Telephone Handset

1 x RJ45 for 10/100 Base-TX Ethernet (MDI-X)

1 x RS-232 Console Port

1 x Hardware Reset Switch

1 x DC 5V Power Connector

Measurements

Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm

Weight : 300g

Temperature

Operating : 0 to 45 Celsius, 32 to 113 Fahrenheit

Non-Operating : -25 to 70 Celsius, -13 to 158 Fahrenheit

Humidity

Operating : 10% to 90% Relative Humidity (Non-Condensing)

Non-Operating : 10% to 95% Relative Humidity (Non-Condensing)

System Requirements

Pentium MMX 233MHz (or above) with Ethernet card