PFM-800 is a high-end green Socket 478 ATX industrial motherboard with FSB 533Mhz supported. The system core logic is Intel 845G chipsets. The LPC controller is Winbond 83627HF.

--------------------------------------------------------------------------------

Specification

CPU:

Support Intel Socket 478 Pentium 4 processor

Support Intel Socket 478 Celeron processor

400/533MHz Intel NetBurst micro-architecture bus

Chipset:

Intel 845G + ICH4 chipsets

Winbond 83627HF LCP controller

Main Memory:

Two 184-pin DDR DIMM sockets

Support PC200/PC266 DDR SDRAM up to 2GB

VGA:

Integrated Graphics controller in 845G GMCH

Support 3D/2D enhancements

Support AGP8X bandwidth including AGP4X slot. Max. Bandwidth 1GB/sec

Hardware Monitoring:

Built in Winbond W83627HF

monitors system/CPU temperature and voltage status

USB 2.0:

Onboard USB 2.0 controller in ICH4

Support Hi-speed, Full-speed and Low-speed data transfer rate. Max. Bandwidth 480Mbits/s

Four downstream USB 2.0 ports

Audio:

ICH4 AC-Link with AC97 2.2 compliant

Line-In, Line-Out and MIC port

Primary LAN:

ICH4 integrated Ethernet, 10Base-T / 100Base-TX

Secondary LAN:

Intel 82540EM (10/100/1000Mb) Gigabit LAN or Intel 82551QM (10/100Mb)

PCI to ISA Bridge:

Winbond 83628, Winbond 83629

PCI IDE:

Two enhanced PCI IDE channels which support up to 4 IDE devices

supports ATA-100, data transfer rate up to 100MB/sec

LPC I/O:

Support COM1/COM2, EPP/ECP parallel port

Built-in FDC supports 1.2M/1.44M/2.88M FDD

PS/2 mouse and keyboard connectors

IrDA/FIR supported

Serial Ports:

One RS-232/422/485 and three RS-232 ports

COM3 and COM4 supported by Winbond 83877

Watchdog Timer:

Generates system reset; 256 levels

Solid State Disk Interface:

Supports 2MB~288MB M-Systems DiskOnChip flash disk

System BIOS:

Award BIOS with 2MB/4MB or 8MB Firmware Hub

ACPI/Plug and Play supported

Expansion Slots:

1 AGP4X slot

3 PCI slots

3 ISA slots

Form Factor:

ATX, 305mm (W) x 244mm (L)