ZillioX 6
|
|
|
| Chipset |
- Intel 82443ZX AGPset
- Intel 82371EB (PIIX4E), Supports
:
1. Independent timing of up to 4 drivers
2. "Ultra 33" synchronous DMA mode transfers up to
33Mbytes/Sec
|
| Bus Type |
- 2 PCI local bus slots. 1 ISA bus
slot
|
| CPU |
- All of Intel Pentium® II
Processor
- Intel Pentium® III Processor
- Intel Celeron™ Processor
up to 500MHz
- CPU Clock = Bus Speed x3, x3.5,
x4, x4.5, x5, x5.5
- Supports Slot I on-board 1.5V
and 2.5V regulator. CPU power supply 1.3V to 3.5V adjustable with VID
function
|
| System Memory |
- Two 168pin 3.3V DIMM sockets
support up to 256MB SDRAM memory (Register SDRAM up to 512MB)
|
| BIOS |
- Licensed Award BIOS supports
Flash ROM BIOS, Plug and Play ready.
|
| On board IDE |
- Supports 2 PCI Master IDE ports,
Supports up to PIO mode 4 Timing
- Supports 2 Fast IDE interfaces
for up to 4 IDE devices, support "Ultra DMA/33" synchroncus
DMA Mode transfers up to 33MB/sec.
|
| Bus Speed |
|
| On board audio |
- Based on the Creative CT2511
16bit sound chip. Compatible with Sound Blaster, Sound Blaster Pro and
Windows Sound System Integrated CQM Stereo enhancement support
Provides on-board line-in, microphone-in, speaker-out, line-out and
MIDI/Joystick socket. Full MPC, MPCII and MPCIII compatible.
|
| On board AGP |
- ATI RAGE IIC(or Rage Pro) AGP
graphics controller
- Integraded 3D, 2D and video
acclerators with palette DAC and quadruple clock synthesizer 2MB or
4MB SGRAM display memory on board and a SO-DIMM for extention
- Use 8MB SGRAM maximum
- Support a maximum resolution of
1600x1200 at 75Hz(Depending on the memory configuration)
|
| I/O Feature |
- Winbond W83977 EF I/O chip.
- All I/O ports can be
enabled/disabled by BIOS setup
- 1 Floppy port supports up to two
3.5" or 5.25" floppy drivers (360K/720K/1.2M/1.44M/2.88M)
- Supports LS-120 floppy disk
driver and ZIP drive
- 2 High speed 16550 fast
compatible UARTs (COM1/COM2/COM3/COM4 selectable) with 16-byte
send/receive FIFOs and supports MIDI mode
- 1 Enabled parallel port
(SPP/EPP/ECP) at I/O address 378H/278H/3BCH with additional
bi-direction I/O capability and multi-mode (SPP/EPP/ECP) (IEEE1248
compliant)
- Provides protection circuit to
prevent damage to parallel port when a connected printer is powered up
or operated at higher voltage
|
| Green Function |
- supports ACPI specification and
OS Directed Power Management.
- Supports three green modes :
Doze, Standby and Suspend
- Green LED will blink when the
system is in green status
|
| Advanced Feature |
- On-board WB83782D support system
monitoring (monitors system voltage, system temperature &
temperature of CPU, chassis intrusion and FAN speed)
- Supports keyboard password
power-on.
- Support LDCM (optional).
- Supports both internal and
external modem ring power-on
- Supports wakeup on LAN.
- On-board switching voltage
regulator with VID (supports 1.3V to 3.5V).
- Provides Anti-Virus function in
BIOS and driver.
- Provides infrared interface.
- Supports auto fan off when
system enters suspend mode.
- Supports power failure resume
function
|
| Board Size |
|
